Fecha de publicación: 30/04/2021 Fuente: WIPO "processing tomato" The utility model discloses a blanching device for tomato processing. The blanching device comprises a hot water tank, a blanking device and a collecting box, Supporting rollers are arranged in shaft holes in the left end and the right end of the hot water tank respectively, belt pulleys are fixed to the front ends and the rear ends of the two supporting rollers respectively, the two belt pulleys corresponding to the left and the right on the two supporting rollers are in transmission connection through a belt, and material frames are fixed between the front belt and the rear belt at equal intervals. an output shaft of the servo motor is fixedly connected with the end part of the supporting roller on the left side; The discharging device is installed on the upper side of the left end of the hot water tank, and a material stirring assembly is arranged in the middle of the hot water tank and correspondingly matched with the material frame. The collecting box is arranged at the opening of the rear side face of the right end of the hot water tank and integrally connected with the hot water tank, and a collecting assembly is arranged in an inner cavity of the collecting box; According to the blanching device for tomato processing, the tomatoes are blanched through warm water, meanwhile, the tomatoes are overturned in the conveying process, and the comprehensive and uniform blanching is guaranteed.