Fuente: Textiles (MDPI) Textiles, Vol. 6, Pages 49: Enhancing High-Performance Mechanical Properties of Lignin/PVA-Based Fiber: How Purity, Morphology, and Spinnability Play a Role
Textiles doi: 10.3390/textiles6020049
Authors:
Silvia Mar’atus Shoimah
Yati Mardiyati
Arif Basuki
Valentinus Alphano Dabur
Husaini Ardy
Sigit Puji Santosa
Steven Steven

Lignin is an abundant aromatic biopolymer, but its conversion into high-performance fibers remains challenging due to intrinsically poor spinnability, structural heterogeneity, and inefficient stress transfer in lignin-rich systems. In this study, a processing and structure strategy is demonstrated to overcome these limitations by transforming industrial black-liquor kraft lignin into a spinnable and load-bearing fiber component. Kraft lignin recovered from black-liquor waste was extracted and subsequently purified using a hot-water treatment to remove inorganic impurities and thermally unstable fractions, increasing lignin purity to 95.9% through extensive deionized water purification using a water-to-lignin ratio of 300:1. The purified lignin was then blended with poly(vinyl alcohol) (PVA), wet-spun into continuous filaments, and subjected to post-spinning hot drawing to induce molecular orientation. This sequential extraction, purification, blending, spinning, and drawing approach enables stable wet spinning and the continuous formation of lignin-rich lignin/PVA filaments without filament breakage, directly addressing the primary processing bottleneck of lignin-based fibers. Molecular-level miscibility between lignin and PVA is confirmed by the presence of a single glass transition temperature at 88.3 °C, indicating the formation of a homogeneous amorphous phase. SEM observations reveal composition-dependent surface roughness and non-circular cross-sectional morphologies arising from differential coagulation and shrinkage, demonstrating that lignin actively participates in the load-bearing fiber network rather than acting as a passive filler. As a result of purification-enabled spinnability, true blend miscibility, and post-spinning hot drawing, fibers with a lignin-to-PVA composition of 40:60 achieve a maximum tensile strength of 2.8 GPa, approaching the performance range of commercial high-strength polymer fibers. This work establishes a clear relationship between material structure, processing strategy, and resulting properties, highlighting the potential of industrial lignin waste as a sustainable precursor for advanced fiber applications.