Fuente: Textiles (MDPI) Textiles, Vol. 6, Pages 43: The Effect of Tow Stretch Breaking Process Parameters on High-Bulk Acrylic Yarn Properties
Textiles doi: 10.3390/textiles6020043
Authors:
Kenan Yildirim
Ferhan Gebes
İlter Sevilen
Tugce Begum Bilir
Emel Kucukoglu

This study represents the first comprehensive investigation examining how oven temperature and drawing ratios, two key tow stretch-breaking parameters, influence the properties of high-bulk acrylic yarns. Only the tow parameters were altered, while all other production parameters involved in converting from tow to yarn remained constant. Two experimental sets were conducted. In the first, oven temperatures (100 °C, 120 °C, 130 °C, 150 °C, and 170 °C) and the ratios (1.3, 1.47, 1.59, and 1.64) in the drawing zone (E1) were altered. In the second, oven temperatures (130 °C and 150 °C) and the ratios (1.3, 1.35, 1.49, 1.54, 1.62, 1.66, 1.70, 1.81, and 1.90) in the break-draw zone (E5) were altered. The samples, produced on industrial-scale machines, were evaluated for shrinkage of fiber slivers in water steam, yarn hairiness, unevenness, tensile strength and strain, and hand-feel rating of yarn balls. The highest shrinkage was obtained at 130 °C and 150 °C with the drawing ratio of 1.47, while the lowest occurred at 130 °C with the drawing ratio of 1.3. The lowest tensile strength and strain were obtained at 150 °C, while the highest values were obtained at 130 °C with 1.59. The yarn hairiness and unevenness were lowest at 130 °C and increased at both lower and higher temperatures.