Fuente: Polymers Polymers, Vol. 18, Pages 978: Experimental and Finite Element Investigation of Bolted Connections in GFRP Composite Cross-Arms for Energy Distribution Towers
Polymers doi: 10.3390/polym18080978
Authors:
Burak Talha Kılıç
Eray Baran

This study investigates bolted connections in open-section glass fiber-reinforced polymer (GFRP) composite cross-arms for 34.5 kV energy distribution towers. Six GFRP angle sections (L50 × 5 to L120 × 12) were tested under tensile loading using a constant edge distance-to-bolt diameter ratio (e/d = 5), and the connection performance was evaluated based on general maximum and deformation-based criteria (4% and 1 mm hole elongation). Connection capacities ranged from 14.65 to 36.68 kN for single-bolt configurations. Results from multi-bolt connections tests indicated strong influence of bolt layout on connection performance. The highest load capacities of 46.45 kN and 45.93 kN were obtained, respectively, with the two-row bolt configuration and staggered configuration. Comparison of the measured load capacities with ASCE/SEI 74-23 predictions revealed significant discrepancies depending on the assumed failure mode of the connection. A simplified finite element model was developed to predict load–displacement response, capturing initial stiffness and overall trends with reasonable agreement, particularly for connections exhibiting similar failure modes. The findings provide a reliable basis for selecting appropriate bolted connection details in open-section GFRP cross-arm systems.