Fuente: Polymers Polymers, Vol. 18, Pages 564: Fabrication and Properties of Pine Fiber-Reinforced Polymer Composite Incorporating Suberinic Acids Extracted Under Different Conditions
Polymers doi: 10.3390/polym18050564
Authors:
Anrijs Verovkins
Galia Shulga
Janis Rizikovs
Brigita Neiberte
Daniela Godina
Laima Vevere
Rudolfs Berzins
Talrits Betkers
Valerija Kudrjavceva

To improve the extrusion processing of wood–plastic composites (WPCs), functional additives known as internal lubricants are incorporated into the composite formulations. The lubricants play a crucial role in decreasing the melt viscosity of WPCs, which in turn has a positive impact on energy consumption, productivity, and overall composite performance. This study shows the effect of suberinic acids (SAs), extracted from birch outer bark via alkaline water and water–ethanol hydrolysis at different pH values, on the processing behavior and properties of a recycled polypropylene-based composite filled with pine microfibers. The extracted SAs were characterized by gas chromatography–mass spectrometry, Fourier transform infrared spectroscopy, gel permeation chromatography, thermogravimetric analysis, and differential scanning calorimetry. The conducted analyses revealed notable differences in the chemical composition, molecular weight, and molecular polydispersity of the SAs. Betulin was identified as the dominant component (49–86%). The pine sawdust was treated with 2% NaOH at 90 °C for 90 min prior to composite fabrication. The incorporation of 4.0 wt% SAs into the WPC formulations reduced the extruder rotor’s maximum and minimum torques torque, indicating improved processability of the composite. Mechanical and wetting properties of the WPC samples were evaluated. The samples containing SAs exhibited an increased elongation at break by 37.9–51.6% and bending deformation by 12.8–17.5%, depending on the extraction conditions of SAs, accompanied by a slight reduction in the mechanical properties and slight increase in water sorption compared with the composite filled with the alkaline-treated pine microfibers. The results showed enhanced flexibility and ductility in the SAs-containing WPCs. The presence of a 1.0 wt% maleic anhydride-grafted polypropylene in the samples led to an increase their mechanical properties, along with the reduced water sorption.