Fuente: Polymers Polymers, Vol. 17, Pages 3130: Sustainable Cellulose- and Pectin-Rich Triboelectric Nanogenerator for Mechanical Energy Harvesting and Self-Powered Humidity Sensing
Polymers doi: 10.3390/polym17233130
Authors:
Seongwan Kim
Farhan Akhtar
Shahzad Iqbal
Muhammad Muqeet Rehman
Woo Young Kim

This study develops a high-performance triboelectric nanogenerator (TENG) through Citrullus lanatus rind powder (CLP) which originates from watermelon waste to generate sustainable power and detect humidity. The SEM and FTIR results showed that CLP contains a natural porous structure and multiple polar functional groups which improve both the charge transfer and retention capabilities. The CLP-TENG device operated in vertical contact–separation mode with PTFE as the counter layer to generate a 255 V open-circuit voltage and 30 µA short-circuit current and 35 µW peak power output at 4 Hz and 20 MΩ load. The device successfully charged a 4.7 µF capacitor to 5 V during a 80 s period and operated low-power electronic devices to prove its ability as a sustainable power source. The device output increased with increasing operating frequency while showing operation stability throughout more than 1000 cycles and seven days of continuous operation. The device demonstrated a strong humidity detection ability through its voltage response which decreased from 250 V to 120 V when the relative humidity rose from 30% to 90%. The research proves that agricultural waste can be transformed into environmentally friendly materials which perform well in green energy systems and environmental monitoring applications.