Fecha de publicación: 22/02/2023 Fuente: Wipo "BigData" A big data perceptual identification storage terminal 9 has an outer device main body 1 comprising heat insulating roof (16) damp-proof base (17) and side walls (1) (see fig 1). At least cooling fan (18) with dust filter (19) preferably at a rear wall (figure 3) opposite a front door (figs 1,3). The figure 2 shows how terminal 9 is mounted inside, with damp absorbing plates 22 mounted to side walls via clamps A (See fig 5). The termina 9 is mounted to a mounting seat 2 (plan view in fig 4 with optional array of bolt mounting holes 8) that also has at least one movable limit (alignment) plate 3 arranged to the lower side edge of the terminal 9 (see also fig 4). The limit plate is attached to a mechanism B (see fig 6) comprising movable block assembly (5, 7) on threaded rod 6 within groove 4. The limit plate aids workers when mounting and disassembling the terminal. Also shown is a storage element protection mechanism comprising sliding baffle 12 protecting at least one jack 11 located in a chamber 10 of the terminal. The baffle has a pull rod 13 for a user to slide the baffle open and releasing magnet retaining means 14 and 15 arranged on the baffle and chamber respectively.