Fecha de publicación: 23/10/2024 Fuente: Polymers Polymers, Vol. 16, Pages 2970: Comparative Assessment of a Light-Curable Dental Composite Reinforced with Artificial Fibers
Polymers doi: 10.3390/polym16212970
Authors:
Bartosz Bienias
Jolanta Kostrzewa-Janicka
Kamila Wróbel-Bednarz
Izabela Strużycka

FRCs (Fiber-Reinforced Composites) are materials that are being used increasingly more often in dentistry as an alternative to traditional restorations made of ceramics or metals. The aim of this study was to carry out a comparative analysis of the strength parameters of a light-curable dental composite reinforced with one single band and two single bands of artificial fibers. The specimens for the strength tests were prepared in accordance with the guidelines of the PN-EN ISO 4049:2019-07 international standard. The test material covered specimens of composite reinforced with single (one or two) bands of fibers. The following bands of fibers were used: carbon (WGL), aramid (AMD) and hybrid carbon–aramid (WGL-AMD). The presence of one single band of aramid fibers caused a three-fold increase in deflection, with a simultaneous increase in the Young’s modulus of over 140%. The flexural strength of specimens reinforced with one single band of aramid fibers was higher by 280% than that control group specimens (KONT). To summarize the performed tests, the incorporation of carbon, aramid and hybrid carbon–aramid fibers into organic matrix has a significant impact on the values of the mechanical parameters of dental composites. The results indicate that particular attention should be paid to aramid fibers, which have rarely been used in dentistry so far.