Fuente:
Polymers
Polymers, Vol. 18, Pages 1169: Effects of Freeze–Thaw Cycles and Basalt Fiber Reinforcement on the Mechanical Properties and Constitutive Model of Lunar Regolith Simulant Geopolymer Under In Situ Construction Environments
Polymers doi: 10.3390/polym18101169
Authors:
Jianghuai Zhan
Xuanyi Xue
Haolan Yi
Fei Wang
Shuai Li
Jianmin Hua
This study investigated the effects of freeze–thaw cycles on unreinforced and basalt fiber-reinforced lunar regolith simulant (LRS) geopolymer. Specimens were subjected to 0, 3, 6, and 10 freeze–thaw cycles. Compressive strength, flexural strength, elastic modulus, peak strain, and failure mode were measured. Damage degree and gain ratio were used to evaluate fiber reinforcement. Results showed that the unreinforced LRS geopolymer exhibited considerable fluctuation in compressive strength during freeze–thaw cycles. Its compressive strength first increased, then decreased; its flexural strength continuously declined; and its elastic modulus and peak strain showed opposite trends, with typical brittle failure. In contrast, basalt fiber-reinforced LRS geopolymer demonstrated superior frost resistance. Its compressive strength increased continuously with freeze–thaw cycles, reaching 23.5% after 10 cycles. Its flexural strength decreased but stabilized, with a damage level of only 16.0% after 10 cycles, significantly lower than that of the unreinforced group (26.1%). Its elastic modulus increased continuously while peak strain decreased gradually, with failure exhibiting some ductile characteristics. Gain ratio analysis showed compressive and flexural strength gain ratios of 1.92 and 1.69, respectively, after 10 cycles, indicating significant reinforcement. Among three classical constitutive models (Guo Zhenhai, Saenz L.P., and Carreira D.J.), the Guo Zhenhai model provided the best fit for stress–strain curves of both geopolymer types under all freeze–thaw conditions, making it the recommended constitutive model. This study provides theoretical support for LRS geopolymer applications in extreme environments such as the lunar surface.