Fecha de publicación: 21/09/2017 Fuente: WIPO "beekeeper" Producing honey by the industrial methods has a 160 ‐year experience and started with inventing modern hives. The modern hives have evolved during these years due to their use by beekeepers; however they still have some defects. The inventive pieces of this hive are divided in five distinct parts. The lid of hive has a groove in its middle in order to insert the rope or strap. The groove is used to stabilize the hives in the vehicle for the transportation. The second piece is called "position giver" which is installed at four sides of the hive to prevent the vibration of the hive parts during transportation. The third piece is called build stop. Regarding the V – Shaped design of the grooves, this network permits the bee waste to exit from the down side of the hive. The fourth piece is the hive floor at the down side of which a grid is created both to make the hive ventilation easier and stop the entrance of wind. The fifth piece is the leg of hive which has three characteristics.